The tape slitter machine is mainly used to cut the tape according to a certain size. The machine can cut the tape according to different adjustment ratio, which can meet the production requirements of different tape.

Slitter machine operation precautions:

1. Before using the tape scutcher, check whether the working position is adjusted correctly, the lubricating part should be greased in advance, and check whether the cutting tool of the tape scutcher is sharp.
2. Before work, it should also check whether the tape slabbing machine is abnormal, and input the instructions to be processed into the computer in advance for inspection.
3. Before starting the tape slitter machine, the operator should ensure that there are no others around to avoid accidental injury to others.
4. Before starting, ensure the normal voltage, current and hydraulic pressure to ensure the safe and effective operation of the equipment.
5. During the operation of the tape slitter machine, in order to avoid getting the hand involved in the winding and causing personal injury, be careful not to touch the film roll or roll core during operation.
6. When operating the tape scutcher, be careful not to scratch or cut the roll core with a knife or hard object.
7. After the tape slitter is put into operation, the best working state of the equipment should be adjusted in time according to the production situation to ensure that the indentation of the slitter is moderate, the slitter has no burrs, and the trimming position on both sides is appropriate.
8. When the equipment is not in use, the tape slitter should be cleaned and maintained regularly to ensure that it can be used directly next time. For example, every half a year each part of the transmission chain, gear lack of oil, butter; Reducer lubrication, the lubrication of the bushing and shaft on the winding shaft, the lubrication of the air source processor, or the regular check whether the screws are loose, it should be noted that the tape scutcher should not use corrosive chemicals to wipe the embossing wheel, the rubber wheel, and the winding shaft during maintenance.

Principle of tape slitting machine:

1. The paper slitting machine needs to cut the whole roll or the whole raw material to a fixed length, such as plastic packaging materials, packaging cartons, steel plates, films, leather, wood chips, etc., which must be used for fixed-length slitting control.

2. The slitting length can be set continuously. If there is an error in the actual slitting length, it can be calibrated by setting parameters.